Connecting the ipodĥ or external usb device, Using this feature, Connecting the ipod or external usb – Chrysler 2012 200 Convertible - Owner Manual User Manual
Page 279: Device
Connecting The iPod
ா
Or External USB Device
Use the connection cable to connect an iPod
or external
USB device to the vehicle’s USB connector port which is
located in the center of the instrument panel below the
climate controls.
Once the audio device is connected and synchronized to
the vehicle’s iPod
/USB/MP3 control system (iPod or
external USB device may take a few minutes to connect),
the audio device starts charging and is ready for use by
pressing radio switches, as described below.
NOTE:
If the audio device battery is completely dis-
charged, it may not communicate with the iPod
/USB/
MP3 control system until a minimum charge is attained.
Leaving the audio device connected to the iPod
/USB/
MP3 control system may charge it to the required level.
Using This Feature
By using iPod cable or external USB device to connect to
USB port:
• The audio device can be played on the vehicle’s sound
system, providing metadata (artist, track title, album,
etc.) information on the radio display.
USB Connector Port
4
UNDERSTANDING YOUR INSTRUMENT PANEL
277