Starting procedures, Normal starting – Chrysler 2012 200 Convertible - Owner Manual User Manual

Page 307

Advertising
background image

STARTING PROCEDURES

Before starting your vehicle, adjust your seat, adjust both
inside and outside mirrors, and fasten your seat belt.
Make sure all occupants have securely fastened their seat
belts.

WARNING!

When leaving the vehicle, always remove the key

fob from the ignition and lock your vehicle.

Never leave children alone in a vehicle, or with

access to an unlocked vehicle. Allowing children
to be in a vehicle unattended is dangerous for a
number of reasons. A child or others could be
seriously or fatally injured. Children should be
warned not to touch the parking brake, brake
pedal or the shift lever.

Normal Starting

The shift lever must be in the PARK or NEUTRAL
position before you can start the engine. Apply the brakes
before shifting to any driving gear.

NOTE:

Normal starting of either a cold or a warm

engine does not require pumping or depressing the
accelerator pedal.

Tip Start
Do not

press the accelerator. Turn the ignition key briefly

to START position, and release it. The starter motor will
continue to run, and it will disengage automatically
when the engine is running. If the engine fails to start, the
starter will disengage automatically in 10 seconds. If this
occurs, turn the ignition switch to the LOCK position,
wait 10 to 15 seconds, then repeat the “Normal Starting”
procedure.

5

STARTING AND OPERATING

305

Advertising