To enter remote start mode – Chrysler 2013 300 SRT - Owner Manual User Manual

Page 30

Advertising
background image

Remote Start Abort Message On Electronic Vehicle
Information Center (EVIC) — If Equipped

The following messages will display in the EVIC if the
vehicle fails to remote start or exits remote start prema-
turely:

• Remote Start Aborted — Door Ajar
• Remote Start Aborted — Hood Ajar
• Remote Start Aborted — Trunk Ajar
• Remote Start Aborted — Fuel Low
• Remote Start Disabled — Start Vehicle To Reset

The EVIC message stays active until the ignition is cycled
to the ON/RUN position.

To Enter Remote Start Mode

Press and release the REMOTE START button on
the RKE transmitter twice within five seconds.
The vehicle doors will lock, parking lights will
flash and the horn will chirp twice (if pro-

grammed). Then, the engine will start and the vehicle will
remain in the Remote Start mode for a 15-minute cycle.

NOTE:

• If an engine fault is present or fuel level is low, the

vehicle will start and then shut down in 10 seconds.

• The park lamps will turn on and remain on during

Remote Start mode.

• For security, power window and power sunroof op-

eration (if equipped) are disabled when the vehicle is
in the Remote Start mode.

28

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising