Synchronizing esc – Chrysler 2013 300 SRT - Owner Manual User Manual

Page 411

Advertising
background image

NOTE:

• Each time the ignition is cycled ON, the ESC system

will be ON even if it was cycled off previously.

• The ESC system will make buzzing or clicking sounds

when it is active. This is normal; the sounds will stop
when ESC becomes inactive following the maneuver
that caused the ESC activation.

The “ESC OFF Indicator Light” indicates the
Electronic Stability Control (ESC) is partially off

Synchronizing ESC

If the power supply is interrupted (battery dis-
connected or discharged), the “ESC Activation/
Malfunction Indicator Light” may illuminate
with the engine running. If this should occur,

turn the steering wheel completely to the left and then to
the right. The “ESC Activation/Malfunction Indicator
Light” should go out. However, if the light remains on,
have the ESC and BAS checked at your authorized dealer
as soon as possible.

5

STARTING AND OPERATING

409

Advertising