Spare tire removal instructions – Chrysler 2013 Country - User Guide User Manual

Page 101

Advertising
background image

Spare Tire Removal Instructions

• The spare tire is located under the vehicle

beneath the center console area.

1. Assemble the spare tire tools into a T-handle

and place the square end over the spare tire
winch drive nut.

2. Rotate the nut to the left until the winch

mechanism stops turning freely. This will
allow enough slack in the cable to allow you
to pull the spare tire out from underneath
the vehicle.

3. Assemble the winch handle extensions to

form the spare tire hook, and pull the spare
tire from under the vehicle.

NOTE:
If either front tire is flat it may be necessary
to jack up the vehicle to remove the compact
spare tire/cover assembly from under the ve-
hicle.

4. Stand the tire/cover assembly upright and

remove the wheel spacer by squeezing the
winch retaining tabs together. Push the
retainer through the spare tire to release it
from the wheel.

W H A T T O D O I N E M E R G E N C I E S

99

Advertising
This manual is related to the following products: