Chrysler 2013 Country - User Guide - Manual (Page 115)

FLUIDS AND CAPACITIES
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant–
3.6L Engine
We recommend you use MOPAR®
Antifreeze/Coolant 10–Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
13.4 Quarts (12.6 Liters)
Includes heater and coolant
recovery bottle filled to
MAX level. Add 2.9 Quarts
(2.8 Liters) if equipped with
rear heater.
Engine Oil with Filter–
3.6L Engine
We recommend you use API certi-
fied 5W-20 engine oil, meeting the
requirements of Chrysler Material
Standard MS-6395. Refer to your
oil filler cap for correct SAE grade.
6 Quarts (5.6 Liters)
Engine Oil Filter–
3.6L Engine
We recommend you use
MOPAR® Engine Oil Filters.
—
Spark Plug– 3.6L Engine
We recommend you use
MOPAR® Spark Plugs
(Gap 0.043 in [1.1 mm]).
—
Automatic Transmission
We recommend you only use
MOPAR® ATF+4® Automatic
Transmission Fluid. Failure to
use ATF+4 fluid may affect the
function or performance of your
transmission.
—
Brake Master Cylinder
We recommend you use MOPAR®
DOT 3 and SAE J1703. If DOT 3
is not available, then DOT 4
is acceptable.
—
Power Steering Reservoir
We recommend you use MOPAR®
Power Steering Fluid +4 or
MOPAR® ATF+4® Automatic
Transmission Fluid.
—
Fuel Selection– 3.6L Engine 87 Octane
20 Gallons (76 Liters)
(Approximate)
M A I N T A I N I N G Y O U R V E H I C L E
113