License plate lamp – Chrysler 2014 200 - Owner Manual User Manual
Page 472
Advertising
4. Twist and remove socket from lamp.
5. Remove bulb from socket and replace.
6. Reinstall the tail lamp, fasteners, and trunk liner.
License Plate Lamp
1. Using a small screwdriver, press inward the locking
tab on the side of the lamp assembly and pull down on
the lamp assembly for removal.
2. Pull bulb from socket, replace, and reinstall the lamp
assembly into place ensuring the locking tab is secure.
Tail Lamp Housing
470
MAINTAINING YOUR VEHICLE
Advertising