Chassis – Chrysler 2014 200 - Owner Manual User Manual
Page 475
Component
Fluid, Lubricant, or Genuine Part
Spark Plugs – 2.4L with
PZEV*
We recommend you use MOPAR® Spark Plugs (Gap 0.031 in [0.8 mm]).
Spark Plugs – 3.6L Engine
We recommend you use MOPAR® Spark Plugs (Gap 0.043 in [1.1 mm]).
Fuel Selection
87 Octane
* PZEV = Partial Zero Emission Vehicle
Chassis
Component
Fluid, Lubricant, or Genuine Part
Automatic
Transmission
Use only ATF+4® Automatic Transmission Fluid. Failure to use ATF+4® fluid may affect the
function or performance of your transmission. We recommend MOPAR® ATF+4® fluid.
Brake Master
Cylinder
We recommend you use MOPAR® DOT 3 and SAE J1703. If DOT 3 brake fluid is not available,
then DOT 4 is acceptable.
Power
Steer-
ing Reservoir
We recommend you use MOPAR® Power Steering Fluid +4, MOPAR® ATF+4® Automatic
Transmission Fluid.
7
MAINTAINING YOUR VEHICLE
473