To accelerate for passing, Using electronic speed control on hills – Chrysler 2014 Country - Owner Manual User Manual

Page 249

Advertising
background image

Metric Speed (km/h)

• Pressing the SET (-) button once will result in a 2 km/h

decrease in set speed. Each subsequent tap of the
button results in a decrease of 2 km/h.

• If the button is continually pressed, the set speed will

continue to decrease until the button is released, then
the new set speed will be established.

To Accelerate For Passing

Press the accelerator as you would normally. When the
pedal is released, the vehicle will return to the set speed.

Using Electronic Speed Control On Hills

The transmission may downshift on hills to maintain the
vehicle set speed.

NOTE:

The Electronic Speed Control system maintains

speed up and down hills. A slight speed change on
moderate hills is normal.

On steep hills, a greater speed loss or gain may occur so
it may be preferable to drive without Electronic Speed
Control.

WARNING!

Electronic Speed Control can be dangerous where the
system cannot maintain a constant speed. Your ve-
hicle could go too fast for the conditions, and you
could lose control and have an accident. Do not use
Electronic Speed Control in heavy traffic or on roads
that are winding, icy, snow-covered or slippery.

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

247

Advertising
This manual is related to the following products: