Cleaning the parksense® system, Parksense® system usage precautions – Chrysler 2014 Country - Owner Manual User Manual

Page 256

Advertising
background image

Cleaning The ParkSense® System

Clean the ParkSense® sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.

ParkSense® System Usage Precautions

NOTE:

• Ensure that the rear bumper is free of snow, ice, mud,

dirt and debris to keep the ParkSense® system oper-
ating properly.

• Jackhammers, large trucks, and other vibrations could

affect the performance of ParkSense®.

• When you turn ParkSense® OFF, the instrument cluster

will display “PARK ASSIST SYSTEM OFF.” Further-
more, once you turn ParkSense® off, it remains off until
you turn it on again, even if you cycle the ignition key.

• When you move the shift lever to the REVERSE

position and ParkSense® is turned OFF, the EVIC will
display “PARK ASSIST SYSTEM OFF” message for as
long as the vehicle is in REVERSE.

• ParkSense®, when on, will reduce the radio volume

when it is sounding a tone.

• Clean the ParkSense® sensors regularly, taking care

not to scratch or damage them. The sensors must not
be covered with ice, snow, slush, mud, dirt or debris.
Failure to do so can result in the system not working
properly. The ParkSense® system might not detect an
obstacle behind the fascia/bumper, or it could provide
a false indication that an obstacle is behind the fascia/
bumper.

• Ensure the ParkSense® system is OFF if objects such as

bicycle carriers, trailer hitches, etc. are placed within 12
in (30 cm) from the rear fascia/bumper. Failure to do
so can result in the system misinterpreting a close

254

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising
This manual is related to the following products: