Chrysler 2011 300 - Manual (Page 147)

Front Ventilated Seat Operation — Vehicles
Equipped With Uconnect™ Touch 4.3:
Press the CLIMATE hard-key to enter the climate control
screen.
Press the “Driver” or “Pass” seat soft-key once to select
HI-level ventilation. Press the soft-key a second time to
select LO-level ventilation. Press the soft-key a third time
to shut off the seat ventilation.
Front Ventilated Seat Operation — Vehicles
Equipped With Uconnect™ Touch 8.4/8.4 Nav:
Press the “Controls” soft-key located on the bottom of the
Uconnect™ Touch display.
Press the “Driver” or “Passenger” seat soft-key once to
select HI-level ventilation. Press the soft-key a second
time to select LO-level ventilation. Press the soft-key a
third time to shut off the seat ventilation.
NOTE: The engine must be running for the ventilated
seats to operate.
Vehicles Equipped With Remote Start
On models that are equipped with remote start, the
driver’s ventilated seat can be programmed to come on
during a remote start. Refer to “Remote Starting System
— If Equipped” in “Things To Know Before Starting Your
Vehicle” for further information.
Head Restraints
Head restraints are designed to reduce the risk of injury
by restricting head movement in the event of a rear
impact. Head restraints should be adjusted so that the top
of the head restraint is located above the top of your ear.
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145