Enabling and disabling parksenseĥ, Enabling and disabling parksense – Chrysler 2011 300 User Manual

Page 207

Advertising
background image

WARNING ALERTS

Rear Distance

(in/cm)

Greater than

79 in (200 cm)

79-39 in

(200-100 cm)

39-25 in

(100-65 cm)

25-12 in

(65-30 cm)

Less than

12 in (30 cm)

Audible Alert

Chime

None

Single 1/2-

Second Tone

Slow

Fast

Continuous

Display Message

Park Assist On

Warning Object

Detected

Warning Object

Detected

Warning Object

Detected

Warning Object

Detected

Arcs

None

3 Solid

(Continuous)

3 Slow

Flashing

2 Slow

Flashing

1 Slow

Flashing

Enabling And Disabling ParkSense

ParkSense

௡ can be enabled and disabled using the

Uconnect™ Touch System. The available choices are: Off,
Sound Only, or Sound and Display. Refer to “Uconnect™
Touch Settings” in “Understanding Your Instrument
Panel” for further information.

When the ParkSense

௡ soft-key is pressed to disable the

system, the EVIC will display the “PARK ASSIST OFF”

message for approximately five seconds. Refer to “Elec-
tronic Vehicle Information Center (EVIC)” in “Under-
standing Your Instrument Panel” for further information.
When the shift lever is moved to REVERSE and the
system is disabled, the EVIC will display the “PARK
ASSIST OFF” message for as long as the vehicle is in
REVERSE.

The ParkSense

௡ system uses four sensors located in the

rear bumper fascia to scan for obstacles up to 79 in

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

205

Advertising