COMEUP Baby Winch (Ver:03) - Manual (Page 13)

VI. Maintenance and Replacement
11
Wire Rope Replacement
Weight hook
● Put a new wire rope through the hole of the round plate of weight hook.
● Insert a sleeve pin through the thimble of wire rope.
● Insert a pin through the sleeve pin and bent it by pliers.
Drum
● Let a new wire rope w/clamp through the limit lever and insert it into the hole of the drum.
● Put a P.T. screw into the hole of the drum and tighten it by a hexagon wrench.
● Press the ↑ button to rotate the drum in the lifting direction.
● An uneven winding of wire rope may cause the load to be swing, that will damage the rope
and reducing its service life.
Oil Lubrication
Gear lubrication is an important component in insuring
the long life of your winch. The type of lubricant will have a
great influence. Winch are pre-lubricated at the factory and do
not require initial lubrication. Re-lubrication interval depends
upon service. Consult your local lubricant distributor on the
selection that best fits your climate and application
Grease Grade Quantity
Intervals
NIGI NO.0 CWS-80 CWS-160 CWS-230 CWS-300
Caltex Multifak EP
100 cc 250 cc 250 cc 250 cc 1 Year
Cosmogear SP460