COMEUP Baby Winch (Ver:03) - Manual (Page 15)

13
Over-Winding Lift Prevention
● A special mechanism prevents an over-winding
when lifting.
● When the weight hook touches the limit lever.
Lifting is automatically stopped.
● However, if the limit lever is set too close to the
winch body, it will cause serious damage to the
limit lever and the winch body.
● A suggested distance (S) between the limit lever
and winch bottom is as follows.
Reverse-Winding Prevention
● A special mechanism prevents a reverse-winding
when lowering.
● When lowering, a wire rope is fully extended, the
wire rope will be shifted its position from O to X.
● When a wire rope touches the limit lever of
over-winding prevention device. Lowing will be
automatically stopped.
● When the wire rope is shifted to the position of X,
pull it and press the ↑button to return its position
to O.
Winch Model CWS-80 CWS-160 CWS-230 CWS-300
Suggested Distance (S) 80-100 mm 70-90 mm 70-90 mm 70-90 mm