Ceiva 3 Digital Photo Receiver LF3000 - Manual (Page 25)

T R O U B L E S H O O T I N G
Make sure the phone line is securely plugged into the wall jack, as well as the back of
the CEIVA Digital Photo Receiver
TM , and that both plugs are free of dust and debris.
Check Settings located on your CEIVA TM account home page to make sure the correct
location phone number is entered.
Make sure the phone line is not being used by another device at the same time
(fax machine, answering machine, etc.).
Check to make sure there is no delay in hearing a dial tone on your phone line.
T H E R E C E I V E R T U R N S O F F A F T E R A F E W M I N U T E S O F O P E R AT I N G .
Make sure the CEIVA Digital Photo Receiver TM is properly plugged in to an active outlet.
Check Settings at the CEIVA web site to verify the “turn on and turn off” times for
your CEIVA Receiver. Press the black button on the back of your Receiver a few times
to make sure your Receiver has not defaulted to the “lights out” mode.
W H Y D O N ’ T T H E P I C T U R E S S C R O L L ?
Make sure that you have at least two pictures on your Receiver.Then, press the white
button on the back of the Receiver until you see the message that reads, “You can let
go now to start the slide show, or keep holding to connect.”
H OW D O I S TO P T H E P I C T U R E S F R O M S C R O L L I N G ?
To stop the slide show, press the white button on the back of the CEIVA Digital Photo
Receiver
TM once.Your Receiver will continue to display the current picture, until you
restart the slide show (see Pictures Won’t Scroll, above) or advance to the next picture
by manually pressing the white button once.
T H E R E C E I V E R ’ S S C R E E N I S DA R K .
Make sure the power supply is securely plugged in to the back of the CEIVA Digital Photo
>
>
>
>
>
25
S H A R I N G M A D E E A S Y
>