COMP Cams 234 Engine Finishing Kits - Manual

Part #171
Revised 7/19/04
1
COMP Cams® Engine Finishing Kits
(Part #234) GM 454ci Big Block
Thank you for choosing COMP Cams® products; we are proud to be your manufacturer of choice.
Please read this instruction sheet carefully before beginning installation; if you have any questions
please call 1-800-999-0853 for help.
Part #233
Location Qty Contents Description
A* 4 Head Dowel .640 x .500
B
2
Timing Cover / Oil Pump
Dowel
.2466 x .630
C 3 Cam Bolt 5/16-18 x 3/4 Cap Screw, Hex Drive
D 2 Woodruff Key 3/16 x 3/4
All components should be assembled per O.E.M. recommendations.
*Knurl side to block
B
C
B
D
A
INSTRUCTIONS
The COMP Cams® Engine Finishing Kits are provided to help eliminate searching for misplaced parts,
while providing fresh new parts to meet or exceed O.E.M. specifications. These kits are available for
most popular engine applications. To avoid extra spare parts and cost to the installer, some deviation
may occur due to suggestions by nationwide rebuilders and O.E.M. changes in production. We rely on
our customers for additional feedback in order to provide you with the most complete parts
kit available.
Competition Cams, Inc
3406 Democrat Rd.
Memphis, TN 38118
(901)795-2400 FAX (901)366-1807
www.compcams.com