Using a web browser to set security features, Changing security configuration – Comtrol DeviceMaster LT User Manual
Page 63
DeviceMaster LT User Guide: 2000586
Rev. B
DeviceMaster LT Security - 63
Using a Web Browser to Set Security Features
Using a Web Browser to Set Security Features
The follow procedures are discussed below:
•
Changing Security Configuration
•
Changing Keys and Certificates
Changing Security
Configuration
Use the following steps to change security settings in the DeviceMaster LT.
1.
Enter the IP address of the DeviceMaster LT in the Address field of your web
browser and press the Enter key.
2.
Click the Security tab.
3.
Click the appropriate check boxes in the Security Configuration area to enable
or disable security accordingly.
Refer to the help system or
Configure/Enable Security Features Overview
Page 58 for detailed information.
4.
After making changes to the Security Configuration area, click Save.
The Software displays as NS-Link, if you have
installed and configured a device driver.