Comtrol DeviceMaster LT - Manual (Page 90)

90 - Managing the DeviceMaster LT DeviceMaster LT User Guide: 2000586 Rev. B
Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)
Accessing SocketServer Commands in Telnet/SSH Sessions (PortVision DX)
You can open a Telnet or SSH session using PortVision DX. Use the appropriate
procedure for your site:
• Telnet Session (below)
• SSH Session on Page 92
Telnet Session Use the following procedure to access a telnet session with PortVision DX.
1. In PortVision DX, PortVision DX, right-click the DeviceMaster LT in the
Device List pane for which you want to open a telnet session, and click Telnet/
SSH Session.
2. Leave the popup set to Telnet and Selected Port 23, and click Ok.