Checking the socketserver version – Comtrol PortVision DX User Manual
Page 100
PortVision DX User Guide
Checking the SocketServer Version
SocketServer is integrated in the firmware that comes pre-installed on most DeviceMasters,
which provides an interface to TCP/IP socket mode configuration and DeviceMaster services.
You should update SocketServer before:
•
Configuring serial socket ports using SocketServer.
•
Installing an NS-Link device driver for tty or COM ports.
Comtrol recommends verifying that your DeviceMaster contains the latest SocketServer version
to avoid installation problems.
Use the following procedure to check the SocketServer version on the DeviceMaster.
1.
If necessary, click Scan.
2.
Check the SocketServer version number (or NS-Link version if you have installed a
DeviceMaster NS-Link device driver for your operating system) of the Software Version
for the DeviceMaster.
100
Software Settings
- DeviceMaster LT/PRO/RTS/Serial Hub/500