Uploading bootloader – Comtrol PortVision DX User Manual
Page 125
PortVision DX User Guide
Uploading Bootloader
Typically, do not upload the Bootloader unless advised to by Technical Support (or the ftp site).
Technical Support recommends connecting the RocketLinx directly to a PC or laptop when
uploading Bootloader. You may also want to connect the RocketLinx to a UPS while uploading
Bootloader to avoid any power interruption. A power interruption while loading Bootloader will
require that you send the RocketLinx back to Comtrol for repair.
Note: Only upload Bootloader to one RocketLinx at a time.
1.
Make sure that you have located Bootloader downloaded the
latest version
.
2.
Right-click the RocketLinx in the Device List pane for which you want to update, click
Advanced and then Upload Firmware.
Firmware - RocketLinx
125