Comtrol ES7510 - Manual (Page 37)

RocketLinx ES7510 User Guide: 2000544 Rev. B Basic Settings - 37
Configuration Using the Web Interface
Basic Settings
The Basic Setting group allows you the ability to configure switch information, IP address, User name/
Password of the system. It also allows you to do firmware upgrade, backup and restore configuration, reload
factory default, and reboot the system.
The following web pages are included in this group:
• Switch Setting on Page 37
• Admin Password on Page 38
• IP Configuration on Page 39
• Time Setting on Page 41
• DHCP Server Configuration on Page 44
• Backup and Restore on Page 48
• Firmware Upgrade on Page 55
• Factory Defaults on Page 57
• System Reboot on Page 57
Optionally, you can use the CLI for configuration, see Basic Settings (CLI) on Page 136.
Switch Setting
You can assign the System Name, Location, Contact and view ES7510 information.
Switch Setting Page
System Name
You can assign a name to the ES7510. You can input up to 64 characters. After you
configure the name, The CLI system selects the first 12 characters as the name in
CLI system.
System Location You can specify the ES7510 physical location with up to 64 characters.
System Contact
You can specify contact people with up to 64 characters by typing the Administer’s
name, mail address or other information.