Poe scheduling – Comtrol ES7510 User Manual
Page 66
66 - PoE Scheduling
RocketLinx ES7510 User Guide: 2000544 Rev. B
Configuration Using the Web Interface
PoE Scheduling
The PoE Scheduling control is a powerful function to help you save power and money.
You can schedule a PoE port after the PoE Mode has been set to Schedule in the PoE Control page.
Select the port in the PoE Schedule on drop list. Click time blocks that you want to enable the PoE port and
click.Apply.
PD Status Detection
PD Status
Detection
Enable/Disable the PD Status Detection function.
IP Address
Type in the IP address that you want to detect.
Cycle Time(s)
This is the gap per detection in seconds.
Apply
Click Apply to apply the settings.
Note: You must Save the settings (
), if you want maintain these settings if the
ES7510 is powered off.
PoE Control
Description