Comtrol ES7528 User Manual
Page 140
140 - Using the Serial Console
RocketLinx ES7528 User Guide: 2000509 Rev. C
Configuration Using the Command Line Interface (CLI)
11. Press Enter.
12. Log in to the switch. The default user name is admin, password, admin.
a.
Type the login and press the Enter key.
b.
Type the password and press the Enter key.
13. If necessary, configure the IP address for your network. The following example shows how to program an
IP address of 192.168.11.252 with a Class B subnet mask (255.255.0.0).
For more information about using the CLI, see
Command Line Interface Introduction
Switch login: admin
Password:
Switch (version 1.4b_b4-20140902-15:29:54).
Switch>
Switch login: admin
Password:
Switch (version 1.4b_b4-20140902-15:29:54).
Switch>
Switch> enable
Switch# configure terminal
Switch(config)# int vlan1
Switch(config-if)# ip address 192.168.11.252/16