Comtrol Multiport Modems Windows 98 - Manual (Page 11)

Installing the Device Driver 11
Installing Software: ISA-Bus
19. Click OK to dismiss the notice to reboot the PC.
20. Click OK to exit the System Properties window.
21. Reboot the PC so that your changes take effect.
22. If you have installed a RocketModem, go to RocketModem Reconfiguration on
Page 27.
To configure modems, go to Installing Modems on Page 21.
To configure serial printers, go to Adding Serial Printers on Page 28.
Installing Software:
ISA-Bus Follow these steps to install the Windows 98/SE or ME device driver for use with
an ISA-bus adapter.
Note: If you are installing a combination of PCI- and ISA-bus adapters, install all
PCI-bus adapters before installing any ISA-bus adapters.
1. If your are updating from an earlier version of the Windows 98/SE or ME
driver, see the Note on Page 7 before proceeding.
2. Click the Start button, select Settings, then select Control Panel.
3. Double-click the Add New Hardware icon. The Add New Hardware Wizard
starts.
4. Click Next. You are asked if you want to search for new hardware
5. Click No, then click Next.