Comtrol DM Primo User Manual
Page 3
DeviceMaster Primo Hardware Installation
3
Telnet Method
b.
Type telnet 192.168.127.254
(use your IP address if it is different from the
default) in the Open box, and then select OK.
c.
Type 1 to select ansi/vt100 for Console terminal type, and then press the
Enter key.
d.
If you are prompted for the Console
password, type the password and then
press the Enter key. A connection
between your computer and
DeviceMaster should now be
established, and the DeviceMaster
utility program will automatically
start running.
Note: To ensure proper operation, on
the Terminal menu, select Preferences, and then make sure the VT100
Arrows option is selected.
e.
Use the keyboard arrow keys to select [serverConfig], and then press the
Enter key. The next telnet window appears.
f.
Use the keyboard arrow keys to position the cursor over the first digit of
the IP address. Type the correct IP address, and then press the Enter key
to accept this value.
g.
Press the ESC key to return to main menu, and then select Restart and
press the Enter key to activate the change.
6.
Optionally remove the Ethernet cross-over cable from the PC host NIC and
the Primo. Connect a standard Ethernet cable between the Primo Ethernet
port and an Ethernet hub.