Cobra Electronics XRS R10G - Manual (Page 12)

Nothing Comes Close to a Cobra ® 19
18 English
Getting Started
Press Mute/ while the Standby screen is displayed to cycle through
different Standby screens.
The Standby screens will be displayed in the following order:
Main Standby Screen
Standby screen displays information about detector: alert
filtering, automatic muting functions and RDU battery
status. If GPS Locator is connected, compass heading
and GPS status icon also display.
RDU Battery
RDU Battery screen displays status of RDU battery.
Indicates charge left in battery or if it is plugged into
power source and is charging.
Standby Screens
•
Main Standby
Screen
RDU
Battery
I-Mute/I-Mute Pro
City/Hwy Mode
Car
Voltage
Latitude/
Longitude
Speed Compass
Compass, Speed and Latitude/Longitude screens
display only if GPSL is connected.
NOTE: Last Standby screen viewed will be displayed when exiting
Auto Dark mode.
Getting Started
I-Mute/I-Mute Pro and City or Hwy Mode
I-Mute screen displays status of alert filtering (City or
Highway modes) and automatic muting (IntelliMute or
IntelliMute Pro) functions. Refer to related sections
to set these features.
Car Voltage
Car Voltage screen displays voltage level of car battery.
If battery voltage drops below 11.9 volts, an alert sounds.
Low Car Voltage feature in Alert Settings programming
must be activated.
Screens display only if GPS Locator is connected.
Compass
Indicates driving direction.
Speed
Shows speed of vehicle (may be
changed to km/h in Menu).
Lat/Lon
Displays latitude and longitude of
present location.
Compass
NW
Speed
55
mph
Lat / Lon
87º47'22"W
41º54'53"N
Your Detector Your Detector
I-MUTE CITY
PRO