Cobra Electronics XRS R10G - Manual (Page 6)

Installation
Your Detector
Nothing Comes Close to a Cobra ® 7
Installation Overview
6 English
1. Position MDU before actual
mount.
• Do not attempt to adjust
MDU bracket.
• Hold unit in place.
• Using non-permanent
pen, mark two opposite
corners.
2. Peel off film from two-piece
fastener strips. Align with
two corner markings made
in step 1. Press MDU
bracket against windshield.
• Fastener strips cannot
easily be removed.
Strength of adhesive
strips increases with
time.
• Do not pull on MDU for
first 20 minutes.
Main Detector Unit (MDU) Global Positioning System Locator – (XRS R10G Model Only)
Mount the GPS Locator module to the MDU by plugging it into the USB port.
Figure E – Internal View
Introduction