Digilent WaveForms - Manual (Page 78)

WaveForms™ SDK Reference Manual
Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 78 of 85
FDwfDigitalOutDividerSet(HDWF hdwf,
int idxChannel, unsigned int v)
Parameters:
- hdwf – Interface handle.
- idxChannel – Channel index.
- v – Divider value.
The function above sets the divider value of the specified channel.
FDwfDigitalOutDividerGet(HDWF hdwf,
int idxChannel, unsigned int *pv)
Parameters:
- hdwf – Interface handle.
- idxChannel – Channel index.
- pv – Pointer to variable to receive configured value.
The function above is used to verify the divider value of the specified channel.
FDwfDigitalOutCounterInfo(
HDWF hdwf,
int idxChannel, unsigned int *vMin, unsigned int *vMax)
Parameters:
- hdwf – Interface handle.
- idxChannel – Channel index.
- pnMin – Variable to receive the supported minimum counter value.
- pnMax – Variable to receive the supported maximum counter value.
The function above is used to return the supported counter value range.
FDwfDigitalOutCounterInitSet(
HDWF hdwf,
int idxChannel, BOOL fHigh, unsigned int v)
Parameters:
- hdwf – Interface handle.
- idxChannel – Channel index.
- fHigh – Start high.
- v – Divider initial value.
The function above sets the initial state and counter value of the specified channel.
FDwfDigitalOutCounterInitGet(
HDWF hdwf,
int idxChannel, int *pfHigh, unsigned int *pv)
Parameters:
- hdwf – Interface handle.
- idxChannel – Channel index.
- pfHigh – Pointer to variable to receive configured value.
- pv – Pointer to variable to receive configured value.
The function above is used to verify the initial state and counter value of the specified channel.