Digilent 6002-410-006 - Manual

1300 Henley Court
Pullman, WA 99163
509.334.6306
www.digilentinc.com
Digilent myDigital
™ Reference Manual
Revised November 14, 2014
This manual applies to the myDigital rev. A
DOC#: 6002-502-006 Copyright Digilent, Inc. All rights reserved.
Other product and company names mentioned may be trademarks of their respective owners.
Page 1 of 2
Overview
The Digilent myDigital accessory board for the NI myDAQ is designed to work in conjunction with myDAQ to
provide students a cost-effective, portable, and engaging platform for teaching electronics. Along with NI Multisim,
the myDigital and myDAQ provide everything needed to allow students to design, construct, and test basic analog
and digital designs.
1 Using the Digilent myDigital
NI myDAQ provides power (+5 VDC and ±15 VDC) along with eight configurable digital I/O pins, two analog inputs,
and two analog outputs. All of these signals are available to the myDigital at the first two signal blocks at the top of
the breadboard when plugged into the MSP connector. Refer to the NI myDAQ User Guide and Specifications for
detailed specifications on these inputs/outputs. NI myDAQ includes software for using these inputs/outputs for
signal generation and measurement, including a two-channel oscilloscope, voltmeter, function generator, digital
pattern generator, and more. Separate banana jacks on myDAQ connect to the DMM and allow for accurate
measurement of resistance, current, and voltage. All I/O on NI myDAQ is also programmable using LabVIEW™,
making it easy to create custom instruments or student projects that incorporate graphical user interfaces.
Digilent myDigital board.

Power supply connector for stand-alone use

NI myDAQ miniSystem port connector

Breadboard area

Seven-segment LED displays

Buttons (momentary switches)

Slide switches

Discrete LEDs

Onboard power regulator
Features include: