Digilent 240-048P-KIT User Manual
Digilent Hardware
M
M
o
o
t
t
o
o
r
r
R
R
o
o
b
b
o
o
t
t
K
K
i
i
t
t
(
(
M
M
R
R
K
K
)
)
R
R
e
e
f
f
e
e
r
r
e
e
n
n
c
c
e
e
M
M
a
a
n
n
u
u
a
a
l
l
1300 Henley Court, Suite 3
Pullman, WA 99163
(509) 334 6306 Voice | (509) 334 6300 Fax
Revision: August 1, 2012
Doc: 516-000
page 1 of 8
Copyright Digilent, Inc. All rights reserved. Other product and company names mentioned may be trademarks of their respective owners.
Overview
The Digilent Motor Robot Kit (MRK) provides the perfect starting point for those new to robotics, but
has the power to be used for advanced designs and applications as well. The MRK pairs our powerful
Cerebot™ MX4cK microcontroller development board with a rugged steel platform and all the motors,
wheels, and other parts needed to build a complete robot.
This document demonstrates a simple design that will get your MRK up and running, advancing the
robot forward at the press of a button. Using your MRK’s powerful Cerebot MX4cK microcontroller,
you’ll be able to add all sorts of functionality to your robot. Add some of our extensive line of
peripheral modules (Pmods™) and you can design almost anything!
Your Cerebot MX4cK can be programmed with either Microchip MPLAB® IDE or chipKIT™ MPIDE.
Microchip MPLAB IDE can be downloaded for free from microchip.com. chipKIT MPIDE can be
downloaded for free from github.com/chipKIT32/chipKIT32-MAX/downloads.
The demo project used in this design can be downloaded from the Motor Robot Kit product page at
digilentinc.com. For more information on programming the Cerebot MX4cK with MPLAB or MPIDE,
see the Cerebot MX4cK Reference Manual, available from the Cerebot MX4cK product page at
digilentinc.com.
Included parts:
• Cerebot MX4cK
• Two PmodHB5 2A H-bridge motor amplifiers with attachment clips and 6-pin cables
• metal standoffs for microcontroller board
• rugged metal platform with holes on 1/2" center
• two 1/19 ratio motor/gearbox drives with ABS plastic wheels (1/53 gear ratio motors also
available)
• rugged plastic wheels and drag button
• rugged metal motor mount
•
all wiring and assembly hardware included
Functional Description
The rugged steel components have holes on 1/2" centers so Digilent circuit boards and other vendors’
products can be easily attached.
The following tools are recommended for robot assembly:
•
regular and small Phillips head screwdrivers
•
adjustable wrench
•
pliers