Dodge 2013 Durango - Manual (Page 413)

The first press of the MODE button causes the Mode
Selection menu to appear on screen. The current mode is
always the default selection. The mode can be changed
for either Channel/Screen 1 or Channel/Screen 2 using
the remote control.
Use the remote control’s navigation buttons ( ᭡, ᭢, ᭤, ᭣)
to navigate through the available modes, and then press
the remote control’s ENTER button to select the mode.
An alternate method of changing modes is repeated
pressing of the MODE button until the desired mode is
highlighted then press the ENTER button on the remote
control to select the mode.
In a single screen system, when a video mode (such as
DVD-video, Aux video, etc.) is active and Channel/
Screen 1 is selected using the remote control selector
switch, the first press of the remote control’s MODE
button causes the Mode Selection menu to appear.
Numeric Keypad Menu
When the display for either Channel 1 or Channel 2
shows DIRECT TUNE, pressing the remote control’s
ENTER button activates a numeric keypad menu.
Numeric Keypad Menu
4
UNDERSTANDING YOUR INSTRUMENT PANEL 411