Neutral shift procedure – Dodge 2013 Durango User Manual

Page 480

Advertising
background image

3. While still rolling, rotate the AWD control switch to

the desired position.

4. After the desired position indicator light is ON (not

flashing), shift the transmission back into gear.

Alternate Procedure

1. Bring the vehicle to complete stop.

2. With the ignition switch in the ON position and the

engine either OFF or running, shift the transmission
into NEUTRAL.

3. Rotate the AWD control switch to the desired position.

4. After the desired position indicator light is ON (not

flashing), shift the transmission back into gear.

NOTE:

If Steps 1 or 2 of either the Preferred or Alternate

Procedure are not satisfied prior to attempting the shift or
if they no longer are being met while the shift attempt is
in process, the desired position indicator light will flash
continuously while the original position indicator light is
ON, until all requirements have been met.

NOTE:

The ignition switch must be in the ON position

for a shift to take place and for the position indicator
lights to be operable. If the ignition switch is not in the
ON position, then the shift will not take place and no
position indicator lights will be on or flashing.

NEUTRAL Shift Procedure

1. Turn the ignition switch to the ON position, engine off.

2. Vehicle stopped, with foot on brake.

3. Place the transmission into NEUTRAL.

478

STARTING AND OPERATING

Advertising