Dodge 2013 Challenger - Manual (Page 199)

1. Turn the ignition switch to the ON/RUN position.
2. Place the hand-held transmitter 1 to 3 inches (3 to
8 cm) away from the HomeLink ௡ button you wish to
program.
3. Simultaneously press and hold both the Homelink
௡
button you want to program and the hand-held trans-
mitter button.
4. Continue to hold buttons until the EVIC display changes
from “CHANNEL # TRAINING” to “CHANNEL #
TRAINED”, then release both buttons.
NOTE:
• It may take up to 30 seconds or longer in some cased
for the channel to train.
• If the EVIC displays “DID NOT TRAIN” repeat from
Step 2.
Training The Garage Door Opener
1 — Door Opener
2 — Training Button
3
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197