Freeing a stuck vehicle – Dodge 2013 Challenger User Manual

Page 431

Advertising
background image

Once the engine is started, remove the jumper cables in
the reverse sequence:

6. Disconnect the negative (-) jumper cable from the

remote negative (-) post of the vehicle with the dis-
charged battery.

7. Disconnect the negative end (-) of the jumper cable

from the negative (-) post of the booster battery.

8. Disconnect the opposite end of the positive (+) jumper

cable from the positive (+) post of the booster battery.

9. Disconnect the positive (+) end of the jumper cable

from the remote positive (+) post of the discharged
vehicle.

If frequent jump-starting is required to start your vehicle
you should have the battery and charging system in-
spected at your authorized dealer.

CAUTION!

Accessories that can be plugged into the vehicle
power outlets draw power from the vehicle’s battery,
even when not in use (i.e., cellular phones, etc.).
Eventually, if plugged in long enough, the vehicle’s
battery will discharge sufficiently to degrade battery
life and/or prevent the engine from starting.

FREEING A STUCK VEHICLE

If your vehicle becomes stuck in mud, sand, or snow, it can
often be moved using a rocking motion. Turn the steering
wheel right and left to clear the area around the front
wheels. Then shift back and forth between DRIVE and
REVERSE (with automatic transmission) or 2nd gear and
REVERSE (with manual transmission), while gently press-
ing the accelerator. Use the least amount of accelerator
pedal pressure that will maintain the rocking motion,
without spinning the wheels or racing the engine.

6

WHAT TO DO IN EMERGENCIES

429

Advertising