Starting procedure – engine manifold air, Temperature 0°f to 66°f (–18°c to 19°c) – Dodge 2012 Ram Diesel User Manual

Page 40

Advertising
background image

CAUTION!

If the “Water in Fuel Indicator Light” remains on, DO
NOT START the engine before you drain the water
from the fuel filter to avoid engine damage. Refer to
“Maintenance Procedures/Draining Fuel/Water Sepa-
rator Filter” in “Maintaining Your Vehicle” for fur-
ther information.

4. Turn the ignition switch to the START position and
crank the engine. Do not press the accelerator during
starting.

CAUTION!

Do not crank engine for more than 15 seconds at a
time or starter motor damage may result. Turn the
ignition switch to the OFF position and wait at least
two minutes for the starter to cool before repeating
start procedure.

5. When the engine starts, release the key fob.

6. Check to see that there is oil pressure.

7. Release the parking brake.

Starting Procedure – Engine Manifold Air
Temperature 0°F To 66°F (–18°C to 19°C)

NOTE:

The temperature displayed in the Electronic

Vehicle Information Center (EVIC) does not necessarily
reflect the engine manifold air temperature. Refer to

38

STARTING AND OPERATING

Advertising