Power take off – aftermarket installation, Engine runaway, Fuel requirements – Dodge 2012 Ram Diesel User Manual

Page 85

Advertising
background image

Power Take Off – Aftermarket Installation

If you did not order the PTO (Power Take Off) Prep
Package from the factory and want to convert your
vehicle, refer to the Body Builder’s Guide at ww-
w.ramtrucks.com

or contact the manufacturer directly at

(866) 205–4102 (toll free).

ENGINE RUNAWAY

WARNING!

In case of engine runaway due to flammable fumes
from gasoline spills or turbocharger oil leaks being
sucked into the engine, do the following to help
avoid personal injury and/or vehicle damage:
1. Turn the ignition switch to the OFF position.

(Continued)

WARNING! (Continued)

2. Using a CO

2

or dry chemical type fire extin-

guisher, direct the spray from the fire extinguisher
into the grille on the passenger side so that the spray
enters the engine air intake.
The inlet for the engine air intake is located behind
the passenger side headlamp and receives air
through the grille.

FUEL REQUIREMENTS

Use good quality diesel fuel from a reputable supplier in
your vehicle. Federal law requires that you must fuel this
vehicle with Ultra Low Sulfur Highway Diesel fuel (15
ppm Sulfur maximum) and prohibits the use of Low
Sulfur Highway Diesel fuel (500 ppm Sulfur maximum)
to avoid damage to the emissions control system. For
most year-round service, No. 2 diesel fuel meeting ASTM

4

STARTING AND OPERATING

83

Advertising