Drawmer 1960 Mic-Pre/Tube Compressor - Manual (Page 12)

1960 OPERATORS’ MANUAL 10
TECHNICAL SPECIFICATIONS
(All measurements taken at +4dBu operating level)
INPUT IMPEDANCES LINE 20KÙ
MIC 150Ù to 600Ù
AUX 2M2Ù
MIC INPUT NOISE -128.5dB (@ +60dB gain)
MAXIMUM INPUT LEVEL +20dBu
OUTPUT IMPEDANCE 50 Ù
MAXIMUM OUTPUT LEVEL +22dBm (balanced)
BANDWIDTH <10Hz to 22KHz -1dB
COMPRESSOR NOISE AT UNITY GAIN
W ideband 22Hz - 22KHz CCIR ARM IEC A Q-Pk CCIR
AV -82dB -88dB -88dB -91dB -77dB
RMS -81dB -87dB -87dB -90dB
DISTORTION (THD & Noise) 1KHz
Line Input with BYPASS selected < 0.1%
Line Input with NORMAL selected < 0.3%
POWER REQUIREMENTS 230Volt or 115Volt at 50-60Hz, 38 W atts
FUSE RATING 250mA for 230Volt, 500mA for 115Volt
CONFORMING TO IEC 127-2
FUSE TYPE 20mm x 5mm, Class 3 Slo-Blo, 250Volt working
CASE SIZE 482mm (w) x 88mm (h) x 250mm (d)
WEIGHT (incl packaging) 6.0 Kgs