CITIZEN CT-S281 - Manual (Page 22)

— 19 —
4.2 Removing Jammed Paper
1. Turn the printer power off.
2. Open the printer cover. If the cutter blade remains protruded with paper
jammed, do not open the printer cover forcibly. Referring to section 4.4, restore
the blade to the normal position and then open the cover.
3. Remove the jammed paper including any paper chips remaining. (Also take
out the paper roll from the holder.)
4. Turn on the printer. The auto cutter mechanism is initialized and the alarm is
cleared.
CAUTION!
● The print head is hot immediately after printing. Do not touch it with your hand. Do
not touch the heating element of the head with a bare hand or metal object either.
4.3 Cleaning the Print Head
1. Turn the printer power off.
2. Open the printer cover.
3. Wait several minutes. Wipe off any debris on the heating element of the
head using a cotton swab soaked in ethyl alcohol.
CAUTION!
● The print head is hot immediately after printing. Do not touch it with your hand. Do
not touch the heating element of the head with a bare hand or metal object either.