Ecler CA120 - Manual (Page 50)

50
8. TECHNICAL CHARACTERISTICS 8. CARACTERÍSTICAS TÉCNICAS
8. CARACTÉRISTIQUES TECHNIQUES 8. TECHNISCHE DATEN
POWER (STEREO/MONO)
2x56W@4  1% THD
2x68W@4  10% THD
2x34W@8  1% THD
2x41W@8  10% THD
Frequency response 15Hz - 30kHz (-3dB)
THD+Noise @ 1kHz Full Power SPEAKER OUT <0.15%
THD+Noise AUX OUT <0.02%
Channel crosstalk @ 1kHz >65dB
Inputs Sensitivity nom/Impedance LINE1 0dBV (-6dBV*)/>8k 
LINE2
LINE3
0dBV (-6dBV*)/>8k 
0dBV (-6dBV*)/>8k 
MICRO (BAL) -20 to -50dBV/>1k 
CMRR MICRO (BAL) >65dB @ 1kHz
Outputs Level/Minimum Load AUX OUT -2dBV/10k 
Tone control (LINE & MIC) BASS 100Hz ±10dB
TREBLE 6KHz ±10dB
Signal Noise Ratio LINE >85dB
MIC (BAL) >65dB
Talkover TIME 2 Sec**
DEPTH -30dB**
Microphone Noise Gate 20-30 below max.**
Phantom voltage +24VDC/10mA max.*
RS-232 BAUD RATE 9600 (fixed)
DATA 8 bits
PARITY NONE
STOP BITS 1
FLOW CTRL NONE
ANALOG REMOTE (0-10V. based) Volume & Input/preset**
selection
INFRARED REMOTE Volume & Mute
Mains (Using supplied DC adapter) 90-264VAC 47-63Hz
Power consumption (pink noise, 1/8 power @ 4ohm) 33VA/24W
Power consumption (pink noise, 1/3 power @ 4ohm) 58VA/52W
Power consumption Stand By (time 2 minutes) <2.5W
Dimensions WxDxH 160x210x48mm
Weight 950g
*Internally selectable **Software selectable