Chauvet 160-LED - Manual (Page 12)

Setup
-8- Q-Spot™ 160-LED User Manual Rev. 01b
Mounting Before mounting this fixture, read and follow the safety recommendations indicated in
the Safety Notes section (page 2 of this manual).
Orientation Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Rigging CHAUVET® recommends following the general guidelines below when mounting the Q-
Spot™ 160-LED.
• When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
• Make sure to mount this fixture away from any flammable material as indicated in
the Safety Notes section.
• Never mount the fixture in places where rain, high humidity, extreme temperature
changes, or restricted ventilation may affect it.
• If hanging this fixture, make sure that the location where you are mounting the
fixture can support its weight. Please see the Technical Specifications section of this
manual for the weight requirement of this fixture.
Procedure
You can mount the Q-Spot™ 160-LED on a flat, rigid surface or hang it from a truss.
This fixture includes two mounting brackets for overhead mounting. You can attach a
rigging clamp to . You must supply your own “C” or “O” clamps as well as your safety
cable, making sure that they are capable of supporting the weight of this fixture. You
need to use two clamps per fixture.
Product Mounting
Diagram
C clamp
(not provided)
Safety cable
(not provided)
Mounting
brackets
(included)