Inside the box, Maintenance – EcoTech Marine MP40wES User Manual
Page 3
2
3
Inside the Box
PowEr SUPPLY
PowEr Cord
FoaM GUard
MoUnTinG TabS (x4)
driVEr
VELCro STriPS (x2)
drY SidE
ZiP TiES (x4)
wET SidE
Your VorTech Propeller Pump is designed to operate optimally with little
attention after initial setup; however, due to the harsh conditions of a
saltwater aquarium and resulting buildup of algae and other organic
matter, it is advisable to clean your wet side to ensure the longevity
of your purchase.
EcoTech recommends doing a wet side cleaning every 6 to 8 weeks or
as necessary.
This can be accomplished by disassembling the pump's wet side and
gently brushing with a soft brush under running water. If there is calcium
buildup, it may be necessary to soak these parts
in a mild acid solution such as vinegar. Do not
use strong acids, because these may damage
the components.
After cleaning, reassemble the wet side, finger
tightening the drive shaft screw and nut. Do not
use tools to tighten components.
WET SIDE
DISASSEMBLY
WATCh ThE VIDEO:
ecote.ch/mp40disassemble
Maintenance