Operation guide – Eliminator Lighting DMX DJ User Manual
Page 21
2. Operation Guide
2.3.1 Program a bank of scenes into a Chase
2.3.2 Add a Step
1. Program enable.
2. Select the chase using Chase buttons 1-6.
3. Use Bank Up/Down button to select the bank
that contains the scenes you wish to copy.
4. Tap the Music/Bank Copy button.
5. Tap the MIDI/Rec Copy button, all LEDs and
the Segment Display will flash three times briefly
indicating all 8 scenes in this bank have been
programmed into this chase.
1. Program enable.
2. Select the chase you wish to add a step to.
3. Tap the Tap Sync/Display button causing
, the
Segment Display shows the chase and the
next three digits show its step.
a
highlight next to "Step"
first digit in the
Music/Bank Copy
MIDI/Rec Copy
Tap Sync/Display
Tap Sync/Display
18
Chase
Chase Scene
Scene
Bank
Bank
Auto trigger
Auto trigger
Music trigger
Music trigger
Blackout
Step
PROG
Blackout
Step
PROG
Step/time
Step/time
8 8 8 8
8 8 8 8