Eliminator Lighting DMX DJ - Manual (Page 26)

0
30S
SPEED FADE TIME
10MIN
0.1SEC
2. Operation Guide
2.4.2 Auto Mode
2. Use the Bank Up/Down button to select a bank
of scenes to run.
3. After selecting the bank of scenes you wish to
run, you can use the Speed slider(or Tap Sync/
Display button) and Fade Time slider to adjust
the scenes to your desired effect.
4. Tap the Auto/Del button again to exit Auto mode.
23
BANK
Hints:
The Tap Sync button is used to set the speed by tapping the button several
times, the last two taps will define the speed with a maximum of 10 minutes.
Tap Sync will override any previous setting of the Speed slider unless the slider
is moved again.
Auto/Del