elysia museq - Manual (Page 3)

3
WARNING: High Voltage
•
Risk of electric shock.
•
Do not open chassis.
•
Refer service to qualified service staff only.
•
Before connecting the device to the main power supply, check if the right
voltage is selected.
•
Replace fuse with the same type and value only.
•
This device must be connected to ground.
•
Do not use a damaged power cord.
•
Never place containers with liquid, e.g. beverages or a vase, on the unit.
•
Do not expose this device to rain or moisture.
•
Do not use this device near water, e.g. swimming pool, bathtub or wet base-
ment.
CAUTION: Temperature
•
Surfaces of the device may become hot during operation.
•
Do not install this device near any heat source such as radiators, stoves or
other heat sources.
•
Always allow enough ventilation space around the unit for air circulation.
•
Do not cover circulation vents.
CAUTION: Connecting & Mounting
•
Never connect the output of a power amplifier to this device.
•
Place the unit on a rigid board or place it in an appropriate rack.
•
Use the device according to this manual only.
CAUTION: Humidity
•
If this device is moved from a cold place to a warm room, condensation can
occur inside the device. To avoid damaging the unit, please allow it to reach
room temperature before switching it on.
CE Conformity
elysia GmbH, Am Panneschopp 18, 41334 Nettetal, Germany, declares with sole
responsibility that this product complies with the following norms and directives:
•
2006/95/EG Low Voltage Directive (formerly 73/23/EWG or 93/68/EWG)
•
89/336/EWG EMC (Electromagnetic Compatibility) Directive
•
DIN EN 55103-1 EMC of audio equipment - Emission
•
DIN EN 55103-2 EMC of audio equipment - Immunity
This declaration becomes invalid by any unapproved modification of the device.
Nettetal, 01.07.2009 - Ruben Tilgner & Dominik Klaßen