Emerson Radio ES25 - Manual (Page 18)

17
LISTENING TO THE RADIO
1.) Press the STANDBY/ON button on the main unit or the remote control. The
main display turns on.
2.) If necessary, press the button on the front
panel of the main unit or the CD/TUNER button
on the remote control to select the Tuner
function. The display will show an AM or FM
station frequency.
To select a different band, press the STOP/BAND button.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press either the Tune / Buttons on the front panel or > / <
buttons on the remote control until the frequency of the desired station appears
on the display.
• Automatic Tuning
Press and hold the Tune / Buttons on the front panel or > / < buttons on
the remote control until the display begins to move, then release the buttons.
The tuner will search up or down the band for the next strong station and stop
on that station. Repeat this procedure until the tuner stops on your desired
station.
4.) Adjust the VOLUME controls as desired.
You may also adjust the VARIABLE BASS CONTROL level on the front panel
of the Amplifier/Subwoofer unit or BASS + /– buttons on the remote control
unit.
ES25_072904.p65 30/7/2004, 11:34 17