Cisco OL-8131-01 - Manual (Page 12)

Chapter 2 Preparing to Install the Cisco Unified IP Phone on Your Network
Determining the MAC Address of a Cisco Unified IP Phone
2-12
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 5.0 (SIP), Cisco Unified IP Phones
OL-8131-01
Determining the MAC Address of a Cisco Unified IP
Phone
There are several procedures that require you to determine and enter the MAC
address of a Cisco Unified IP Phone. These procedures include adding phones the
the Cisco Unified CallManager database using Cisco Unified CallManager
Administration or using BAT.
Table 2-2 describes the methods that you can use to determine the MAC address
of a phone.
Adding Phones to the Cisco Unified CallManager
Database
Before installing the Cisco Unified IP phone, you must choose a method for
adding phones to the Cisco Unified CallManager database. The following
sections describe these methods:
• Adding Phones with Auto-Registration, page 2-13
• Adding Phones with Cisco Unified CallManager Administration, page 2-14
• Adding Phones with BAT, page 2-15
Table 2-2 Determining the MAC Address of a Phone
Cisco Unified
IP Phone
Method Reference
7905G and
7912G Choose Menu > Settings >
Network Configuration and
look at the MAC Address field See Chapter 4, “Configuring
Settings on the Cisco
Unified IP Phone.”
7905G and
7912G Display the Phone
Configuration Web Page and
look for the MAC address;
enter:
http://PHONE_IPAddress> See Appendix A, “Reference
List of Parameters.”