EVCO EVCLC33DJ2 - Manual (Page 45)

EVCO S.p.A. Vcolor 338 L | Installer manual ver. 2.0 | Code 144VC338LE204
page 45 of 66
16.2 Setting the configuration
parameters
Operate as follows to access the procedure:
1. Ensure that the device is switched on and that no
other procedure is in progress.
2. Touch .
3. Touch “SERVICE”.
4. Touch or to set the password
“-19”.
5. Touch to confirm.
Operate as follows to select a parameter:
6. Touch or to select the relevant parameter.
Operate as follows to set a parameter:
7. Touch the relevant parameter
8. Touch or to set the value.
9. Touch to confirm.
Access to the configuration parameters setting procedure.
Access to the configuration parameters setting procedure.