EVCO c-pro micro - Manual (Page 32)

C-PRO MICRO HARDWARE MANUAL
Page 32
Terminals 1 and 2 : Control input connector (Phoenix pull-out)
Conn. Abbrev. Description
1 12 V DC 12 V DC power supply
2 AO1 Impulse cut-off input
Terminals 3, 4, 5 and 6 : Power connectors (FAST-ON)
Conn. Abbrev. Description
3 LOAD Load
4 LOAD Load (Neutral)
5 LOAD Neutral 230 V AC
6 LOAD Live 230 V AC
The cut-off module allows the control of single-phase fans with a maximum current equal to 5 A. The fan
module live feed must be the same that supplies the controller.
If the C-PRO MICRO is supplied with a DC supply, then it is not possible to use the EVDFAN1 module to
control the fan.
Example:
V AC = 230 V
I max=5 A
VA (max) = 230*5 = 1150 VA
W (max) = 230*5*cosφ = 1150 Watts if cosφ=1