Cisco 7902G - Manual (Page 8)

Chapter 3 Installing the Cisco IP Phone
Mounting the Phone to the Wall
3-8
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Mounting the Phone to the Wall
You can mount the Cisco IP Phone on the wall by removing the footstand and
using the mounting bracket on the back of the phone, or you can use special
brackets available in a Cisco IP Phone wall mount kit. (A wall mount kit must be
ordered separately from the phone.) If you attach the Cisco IP Phone to the wall
using the standard footstand and not the wall mount kit, you need to supply the
following tools and parts:
• Screwdriver
• Screws to secure the Cisco IP phone to the wall
Use the following procedure to mount the phone on the wall using its mounting
bracket.
Before You Begin
To ensure that the handset attaches securely to a wall-mounted phone, remove the
handset wall hook from the handset rest, rotate the hook 180 degrees, and reinsert
the hook. Turning the hook exposes a lip on which the handset catches when the
phone is vertical. For an illustrated procedure, see Installing the Wall Mount Kit
for the Cisco IP Phone.
Procedure
Step 1 Remove the footstand from the phone.
Step 2 Modify the handset rest so that the handset remains on the ear-piece rest when the
phone is vertically placed.
a. Remove the handset from the ear-piece rest.
b. Locate the tab (handset wall hook) at the base of the ear-piece rest.
c. Slide this tab out, rotate it 180 degrees (left to right), and reinsert it.
d. Place the handset on the ear-piece rest.