Configuring startup network settings – Cisco 7902G User Manual
Page 10
Chapter 3 Installing the Cisco IP Phone
Configuring Startup Network Settings
3-10
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
4.
The main LCD screen displays:
•
Current date and time
•
Primary directory number
•
Softkeys
If the phone successfully passes through these stages, it has started up properly.
Otherwise, see to the
“Resolving Startup Problems” section on page 6-12
.
Configuring Startup Network Settings
If you are not using DHCP in your network, you must configure these network
settings on the Cisco IP Phone after installing the phone on the network:
•
IP address
•
IP subnet mask
•
Default gateway IP address
•
Domain name
•
DNS server IP address
•
TFTP server IP address
Collect this information and follow the procedures defined in
Chapter 4,
“Configuring Network Settings on the Cisco IP Phone.”